Many people who face this kind of price tag wonder if they can get away with patching their pipes. But if the sewer line is old there are almost certainly slow drain other bad spots that will give you problems now or in the near future. A series of patch jobs isn't cheap. In the long run, it just makes more sense to replace the entire line.
Visually water line repair examine the frozen pipe for signs of damage including cracks holes or breaks. Begin your quest in the areas that are located closest to cold area such as the outer walls and crawl spaces. The holes can be as tiny as a pinprick, so inspect the pipe closely.
If you need to add copper pipe make sure that you clean the old and new pipe by using sandpaper, inside and out. If it's not clean the solder will not flow into the joint. Another tip is to not over wrap the mail threaded pipe with tape, this can cause a leak. Twice around should be enough. Also, don't over tighten it.
Working on the gas lines is also a complex job that only a licensed plumber can handle because it is very dangerous. Small leaks can't always be detected by odor alone, but a licensed professional has the proper equipment that's needed to ensure that you don't have any leaks in the line.
Remove the cap of the faucet using slip-joint pliers. Tape the teeth of the pliers to prevent damage of the surface. Remove the faucet cam washer and water line repair the rotating ball.
People who own rental properties are great ones to give you information. With all of the service people needed for maintenance on their units, they typically know who to call and what level of work they perform. Most property owners will be more than happy to give you the information you seek. In fact, they were probably in your shoes at one time.
Is your garbage disposal clogged, but it is turning ok? This may be due to a blockage in the pipe. If you look at the pipe work under your sink you will see that the disposal is connected to a pipe that should join to a U bend and providing it was installed correctly it should have a connector that can be undone. If you undo this connector the pipe will pull away and generally this is where most blockages occur. Remove the blockage and reconnect the pipe.